Infinity Cube指尖无限魔方

2018/3/23 posted in  记录

Infinity Cube指尖魔方 有点类似去年全球大火的fidget spinner指尖陀螺 但是目前来看指尖魔方的火爆程度上来说没有指尖陀螺那么厉害

不知道小米是不是看到了指尖魔方kickstarter上相关产品众筹非常成功 于是就做了这款米兔指尖积木,售价还是延续小米的风格 不贵,只要9.9元
小米商城里看到有货,年前想买来着,但是发现运费比商品还要贵 :-( 只能作罢
前几天在淘宝上看到有9.9元包邮的 于是下单
除非包邮或者你附近的小米之家里有出售的话 不建议单独下单
看了下淘宝目前最便宜是券后价11.9 相当于2元的快递费了

淘口令

复制这条信息,¥CFy70KDT3zh¥ ,打开【手机淘宝】即可查看

开箱和拼装

包装

至此拼装完毕,玩起来的确很能打发时间,虽然用料是塑料 但是质量还是不错的
本来想弄个好一点质量的动图的 但是无奈我的这个指尖积木被儿子拿去玩 之后就不知道落在哪里了...
大家将就看下之前录的

3D打印一个?

如果你有3D打印机的话 或许这也是一个可以考虑的选项
你可以在 https://www.thingiverse.com/thing:2595224 下载到stl文件

注意以下内容

Resolution:

0.2 mm

Infill:

20%

Notes:

This thing is optimized for 0.2 mm layer height. Please try that first before any other resolutions. It's also optimized specifically for a 0.4 mm nozzle width, so no guarantees it will work well if you're using another size.

20% infill gives it a tiny bit of heft so it feels better to spin around, but you could probably go up or down from this number depending on your preferences.

Some other tips for best print results: use a skirt that's close to the model and goes up 5-10 layers, keep part cooling fan off for first layer then on for the rest, turn the model diagonally in your slicer so that X and Y axes move together for most of the moves, use 3-5 vertical shells/perimeters to avoid curling, and print at the coolest temperature you reasonably can for your material to avoid stringing or lamination where it's unwanted.




打赏 | Buy me a coffee

dashang